Quick Answer: Can I Put RAM In Slots 1 And 3?

Is 32gb RAM overkill?

32GB, on the other hand, is overkill for most enthusiasts today, outside of people who are editing RAW photos or high-res video (or other similarly memory-intensive tasks)..

Can I combine 4gb and 8gb RAM?

That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick. … Your RAM sticks will work together at the frequency of the lower stick, by default.

Do I need to change my RAM?

You should only upgrade RAM when you want to. As RAM gets faster and higher capacity RAM gets cheaper, I would say replace your RAM when you get a motherboard that won’t support DDR3 for any longer, or about 5 years.

Does it matter what slots I put my ram in?

A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

What happens if you put your RAM in the wrong slots?

The worst that can happen is no boot if RAM is at wrong slots. But no damage of any kind either to RAM or motherboard.

Can I add a third stick of RAM?

Yes, it will add more RAM. Add as many as your motherboard will support. However it would be better to add two with the same total memory as three due to dual channel memory being faster. The third stick won’t be part of dual channel.

Can I use different MHz RAM together?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.

Can you put RAM in the wrong way?

How on earth do you install a RAM stick backwards? The stick and slot are both notched, it’s physically impossible to press the RAM stick into the slot if you don’t line up the notches. It sure isnt impossible to put it in backwards.

How do I know if dual channel is working?

To find out if our RAM (Random-Access Memory) is running in dual channel mode, we now just have to look for the label called “Channels #”. If you can read “Dual” beside it, then everything is ok and your RAM is running in dual channel mode.

Can I put ddr4 RAM in any slot?

The short answer is that yes, there are plenty of differences, but most of the time your motherboard will make the decision for you. A motherboard with DDR4 slots cannot use DDR3, and you can’t put DDR4 into a DDR3 slot.

Which RAM slots to use first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Is it better to have 1 16gb or 2 8gb?

2 8GB sticks will yield roughly 25% more performance over a comparable 16GB stick. Dual channel is always going to be better than single. … All other specs being equal , the 2x 8 can be ran in dual channel mode, which most motherboards support, for a slight increase in performance.

Where do I put the ram in 4 slots?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.