How Do You Hang Eyelet Curtains On Track?

Can I use eyelet curtains on a track?

Curtain tracks are made from either plastic or metal and are used to hang and draw curtains that have heading tape.

You can’t use eyelet curtains or tab top curtains with a curtain track.

They also allow a wider range of curtain styles to be hung, including eyelet, tab top and pencil pleat..

Do eyelet curtains look cheap?

One the reasons eyelets are cheaper (and look cheaper) is because they don’t use as much fabric, so you lose the cosy fullness of pencil-pleat curtains.

What width curtains should I get?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

Should curtains touch the floor?

So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.

When should you hang curtains?

Each curtain panel should be at least as wide as your window. Measure from the spot you plan to hang the rod (usually four to six inches above the window, but a minimum of two inches) to the floor to figure out the length of the curtains. Add more length if you want the drapes to pool.

Do you need a special curtain pole for eyelet curtains?

The only real difference between an eyelet pole and a normal metal curtain pole is the curtain pole rings. … So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.

Which curtain track is best?

Silent Gliss recommend straight tracks over 4m and corded tracks over 3m are corded both sides, or indeed if your curtains are on the heavy side. For a heavyweight option the Silent Gliss 3970 curtain track may be suitable.

How do you hang curtains with rings and hooks?

Use a pin that loops through the plastic thread and hooks onto the ring. Hanging pins create a look that’s polished from the front — no toothy clasps on your panel — and they move smoothly over your drapery rod. You can see the clear plastic loops that securely hold the panel.

How do you measure eyelet curtain drops?

Eyelet curtains should be hung from curtain poles. Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!

Do eyelet curtains need to be double width?

You need to allow for both flat panels to be a minimum of one and a half times the curtain pole width. I personally think they look much better at double the pole width. … To work out the length (drop) for your new eyelet curtains. you will need to hold the tape measure at the top edge of the curtain pole.

How do eyelet curtains work?

Eyelet curtains, also referred to as “grommet curtains,” have holes along the top edge. … They are easy to install and do not require curtain rings. The way that they are woven onto a curtain rod creates beautiful folds in the fabric, which can make just about any room appear more grand and formal.

What kind of curtains use hooks?

What hooks do you need for Pinch Pleat Curtains? These are the curtains that have the pleats sewn into the top. They come as either double or triple pleated curtains, can be used on either a track system or on a rod/pole with rings both use the same type of hooks.

Do you need a special pole for eyelet curtains?

In theory all poles can be used for eyelet curtains, however they do tend to glide more smoothly and are more popular on a metal curtain pole. You can purchase some curtain poles specifically for eyelet curtains and rings are not supplied.